Eye-safe lasers at 1550 nm: what it means outdoors
A laser in a field raises one question before all others: what about people's eyes? The answer has two parts: the physics of the wavelength and the distance, and the engineering around the beam.
Why 1550 nm is called retina-safe
Visible and near-infrared light, up to about 1400 nm, passes through the front of the eye and is focused onto the retina, concentrating its energy a hundred thousand times. That is why a laser pointer can damage the retina. At 1550 nm the water in the cornea and the front of the eye absorbs the light before it reaches the retina. The beam is never focused onto the retina, which is why this region of the spectrum is called "retina-safe" or "eye-safe", and why it is used for lidar and outdoor laser systems.
Eye-safe does not mean harmless at any power. The risk moves to the front of the eye: the cornea can be burned if it receives enough energy. Like welder's flash, such an injury is at the surface; mild cases heal by themselves, while a severe heat burn can scar and then needs treatment. Safety limits for 1550 nm are set well below the measured injury thresholds.
Distance does the rest
A farm laser drone focuses its beam to a spot of about a third of a millimetre on the beetle. Behind that focus, the beam spreads out fast. About 5 metres from the drone, the energy per area is already below the eye's safety limit. More laser power does not change that distance: each shot is the same few joules, and more power only fires it faster.
Eye safety is one of the narrated, interactive chapters on photonicinsecticides.com: 3D scenes, real drone footage and every number traced to the study it comes from.
Layers of protection
Physics is the first layer. A well-engineered machine stacks more on top:
- Straight down only. The laser only ever fires downwards, so the only zone of concern is right below the drone.
- Level check. About 300 times a second the drone checks that it is level; if it tilts, the laser switches off.
- Look before firing. A stereo camera watches for anything unexpected (a person, an animal, a bicycle left in the field), and then the drone simply does not fire.
- Aim only at insects. The telephoto camera checks about a hundred times a second that it is aimed at something shaped like a beetle or a larva, never at anything round, like a pupil.
- A moving spot. Because a hovering drone always sways a little, any stray reflection keeps moving, so an eye at one place would only catch a small part of it.
Lasers in open fields already exist
Laser weeding machines work in the open today with lasers far more powerful than a drone needs: one carries several hundred watts of laser power per unit, another carries class 4 lasers under a frame open at the sides. Their hazard is handled with distance, shields and procedures. A drone that fires only straight down, a few joules at a time, within a zone of a few metres, asks for the same kind of approval for a smaller hazard. Outdoor laser use is covered by standards such as ANSI Z136.6 (safe use of lasers outdoors), and drone operations in Europe by EASA's specific category with a risk assessment.
Sources
- Laser Focus World: eye-safe lasers and retina-safe wavelengths for open-air applications.
- Schulmeister K. (2024). Comparison of laser-induced corneal injury thresholds with safety limits. Seibersdorf Laboratories.
- ANSI Z136.6-2015: Safe Use of Lasers Outdoors.
- EASA: specific category, standard scenarios and SORA risk assessment.
- Carbon Robotics LaserWeeder (class 4 laser product); HGTECH laser weeding robot (4 × 240 W).
- Safety distance and design: photonicinsecticides.com models and the VUB/Flanders Make laser safety analysis (PhotonHub Europe).